PL series (with Y axis)

PL-160~350CM

High rigidity vertical lathe combined with gantry-type Y-axis mechanism which is able for the machining operation similar to bridge type machining center. Providing flexibility for the demand on multiple machining operations and high precision. 

Spec./Model unit PL-160CM PL-200CM PL-350CM
Max. swing dia. : mm 2,000(78.7") 2,500(98.4") 4,000(157.4")
Max. turning dia. : mm 2,000(78.7") 2,500(98.4") 4,000(157.4")
Max. turning height : mm 1,000(39.3") 1,600(62.9") 2,000(78.7")
Live spindle speed : rpm 1-250 1-200 1-100
Number of tool position : pcs R16+L60 R16+L60 R16+L60
Max. workpiece weight : kgs 8,000 12,000 35,000
Standard accessories
  1. Complete splash guard
  2. Hydraulic power unit
  3. Table with manual 4-jaw chuck as spec.
  4. Protection door
  5. Automatic lubrication system
  6. Lubricant chiller for spindle bearing & gear
  7. Air conditioner for electrical cabinet
  8. Work light
  9. Warning light(R/Y/G)
  10. Workpiece counter(CNC controller)
  11. Coolant system with tank
  12. Coolant bed shower system
  13. Service toolbox & tool kits
  14. Leveling bolts & seat pads
  15. Chip conveyor (Hinge type)
  16. Chip trolley
  17. Spindle orientation
  18. Manual of electrical & hydraulic circuit diagram
  19. Manual of operation & maintenance
Optional accessories
  1. Hydraulic chuck & cylinder,size selections
  2. Hydraulic chuck soft jaw x1 set
  3. Foot switch for hydraulic chuck
  4. Power transformer(external)
  5. Oil skimmer(Disk type)
  6. Tool holder base
  7. Other tool holders & special tool holder
  8. Tool presetter inside (Turning dia. is same as table)
  9. Linear encoder of X/Z axis
  10. Extend vertical travel (Z axis)
  11. Hard jaw for hydraulic chuck
  12. High pressure coolant through tool holder
  13. Dual gearbox for live tool spindle
  14. Chip conveyor (scraper type)
  15. Manual guide I
  16. CE certificate
  17. Tooling
  18. Jig & fixture
  19. Turnkey project
  20. Siemens controller
Back