Heavy Duty Series

VL-66~VL-100C/CM

High-grade Meehanite casting for column and bed designed with box structure to reduce vibration. Also with Box way, the model has high rigidity and stability, which provides excellent machining efficiency for tough materials, especially for the Aerospace industry.

Spec./Model unit VL-66C VL-66CM VL-86C VL-86CM VL-100C VL-100CM VL-100CR VL-100CRM
Max. swing dia. : mm 850(33.4") 950(37.4") 1,200(47.2") 1,200(47.2")
Max. turning dia. : mm 850(33.4") 950(37.4") 1,200(47.2") 1,200(47.2")
Max. turning height : mm 650(25.5") 650(25.5") 650(25.5") 800(31.4")
Live spindle speed : rpm - 50-2,250 - 50-2,250 - 50-2,250 - 50-2,250
Number of tool position : pcs 12 12 12 12
Max. workpiece weight : kgs 1,500 2,000 3,500 3,500
Standard accessories
  1. Complete splash guard
  2. Hydraulic 3-jaw chuck & cylinder, size as spec.(VL-66/VL-86)
  3. Table with manual 4-jaw chuck as spec.(VL-100)
  4. Hydraulic chuck soft jaw x 1 set.(VL-66/VL-86)
  5. Footswitch for hydraulic chuck.
  6. Hydraulic power unit.
  7. Protection door.
  8. Automatic lubrication system.
  9. Working light.
  10. Warning light.(R/Y/G)
  11. Workpiece counter.(CNC controller)
  12. Coolant system with tank.
  13. Coolant bed wash down system.
  14. Heat exchanger for electrical cabinet.
  15. Hand tool set with toolbox.
  16. Leveling bolts & seat pads
  17. Chip conveyor.(Hinge type)
  18. Chip trolley.
  19. Spindle orientation
  20. VL-100C, 100CM fixed type crossrail.
  21. Manual of operation & maintenance.
  22. Manual of electrical & hydraulic circuit diagram.
Optional accessories
  1. Hydraulic chuck & cylinder, size selections.(VL-100)
  2. Higher power motor.
  3. Air conditioner for electrical cabinet.(C type)
  4. Table with manual 4-jaw chuck as spec. (VL-66/VL-86)
  5. Power transformer.(external)
  6. Oil skimmer.(Disk type)
  7. Tool holder base.
  8. Other tool holder & special tool holder.
  9. Tool presetter.
  10. Workpiece probe
  11. Linear encoder of X/Z axis.
  12. High & low pressure chucking.
  13. Lubricant chiller for spindle bearing & gear.
  14. Extend vertical travel.(Z axis)
  15. Hard jaw for hydraulic chuck.
  16. Hing pressure coolant through tool holder.
  17. Dual gearbox for live tool spindle
  18. Chip conveyor, scraper type.
  19. Manual guide I.
  20. CE certificate.
  21. Tooling
  22. Jig & fixture
  23. Turnkey project.
  24. Siemens controller.
Back