High Speed Series

VL-46 Series

The spindle is equipped with a wide range motor αip40, providing high output power and twice torque bigger than a general one. With rigidity and stability, the model is suitable for customer’s demand on intelligent manufacturing and a better yield rate.

Spec./Model unit VL-46A/AR VL-46M VL-46G VL-46H
Max. swing dia. : mm  560  (22")  560  (22")  600  (23.6")  650  (25.6")
Max. turning dia. : mm  560 (22")  560 (22")  560 (22")  460 (18.1")
Max. turning height : mm  450 (17.7")  380 (14.9")  450 (17.7")  400 (15.7")
Chuck dia. : mm  305 (12")  305 (12")  305 (12")  305 (12")
Spindle speed : rpm 25-2,500 25-2,500 25-2,500 25-2,500
Number of tool position : pcs 12 12 5 4/6/8
Max. workpiece weight : kgs 450 450 450 450
Standard accessories
  1. Complete splash guard
  2. Hydraulic 3-jaw chuck and rotary cylinder.(VL-46/66/86)
  3. Manual 4-jaw chuck.(VL-100)
  4. Hydraulic power unit
  5. Soft jaws for hydraulic chuck.(VL-46/66/86)
  6. Automatic lubrication system
  7. Heat exchanger for electrical cabinet
  8. Safety glass for front door
  9. Foot switch for hydraulic chuck
  10. Working light
  11. Warning light.(R/Y/G)
  12. Coolant through turret
  13. Coolant system with coolant tank and bed wash down system
  14. Hand tool sets with tool box
  15. Leveling bolts & seat pads
  16. Chip conveyor.(Hinge type)
  17. Chip trolley.
  18. Spindle orientation
  19. Manual of operation & maintenance
  20. Manual of electrical & hydraulic circuit diagram
  21. Workpiece counter.(CNC controller)
Optional accessories
  1. Hydraulic chuck and rotary cylinder.(VL-100)
  2. Manual chuck.(VL-86 series)
  3. Spindle motor upgrade.
  4. High & low pressure chucking.
  5. Auto door.(Automatic opening & closing of main door)
  6. Air conditioner for electrical cabinet.
  7. Power transformer.
  8. Oli skimmer.(Disc type)
  9. Oil mist collector.
  10. Counter display for each insert.
  11. Double cutting tools.
  12. Tool presetter.
  13. Workpiece probe
  14. Dual speed gearbox for the spindle motor.
  15. Chuck position sensor.
  16. Tool holder.
  17. Hard jaw of chuck.
  18. High pressure coolant through turret.
  19. Chip conveyor.(scraper type)
  20. CNC controller 31i seriec.
  21. Manual guide I.
  22. Siemens controller
  23. CE certificate.
  24. Tooling.
  25. Jig & fixture.
  26. Turnkey project.
  27. Servo turret.
  28. X/Z axis encoder.
  29. Full splash guard
Back